Installation Instructions

Step One:

Arrange the dishes on the ground underneath the water spout to decide your positioning. You can control the direction of water flow to your satisfaction.

Step Two:

Set the first pole 9" from the downspout or drainage trough. Each additional pole must be installed 17" away and 3" lower than the previous one.

Step Three:

Install the dishes after each pole is in place. Push firmly in the middle of the dish to insert the pole. Do not hammer.

Step Four:

Arrange the water spouts to pour into the dish below. Check that the spout hangs over the next dish by a few inches.

Step Five:

Test water flow using a garden hose to ensure dishes flow evenly.

Final Results